- 30 carrier rpm for 18 carrier machine
- 25 carrier rpm for 24 carrier machine
Most opt machine for producing hoses of
* Suraksha LPG hoses
* SAE 100 R1 Type AT
* SAE 100 R1A
* SAE 100 R6 (with textile carriers)
*
Electrical cables
* Electronic pitch control - No change gears
The conventional braiding of 2 over 2 is widely used for braiding high pressure hoses. The structure causes the strands of wire to be flexed more aggressively and hence during the pressurisation process, the abrasion between the layer of wires is more intense.
In 3 over 3 braiding, the flexing of the wire strands perpendicular to the direction of lay is minimum. This ensures higher strength against the bursting forces. Also, the longitudinal changes in length of the hose is also minimised. Thus 3 over 3 braiding puts lesser kink on the wire compared to 2 over 2 braiding.
The “Penguin 3 over 3 Braider” adopts this latest technology in braiding and ensures 50% higher productivity for the same horn gear speeds.
FEATURES
ADVANTAGES
• More flexible
• Half bend radius hose
• Higher pressure
• Better performance
• Less cross points
• Higher coverage
• Increase of wire flatness
• Less problems pin hole; nippling
• Equal force to single wire ends
• 50% Higher speed
• Better impulse performance
• Less wire consumption
WIRE BRAIDING SPECIFICATION
Bobbin
TAKE-UP / LET-OFF SPECIFICATIONS